Automotive Sensor Simulator

• for simulating signals of automotive sensors
• for finding hard-to-diagnose faults

possible outputs:

• DC voltage: 0.1 to 5 volts, increment: 0.1 V
• sine-like signal: 1 Hz to 300 Hz (5 volts), 1 Hz increment at 1 - 100 Hz, 10 Hz increment at 100 - 300 Hz
• rectangular-like signal: 1 Hz to 1 KHz (5 volts), 1 Hz increment at 1 - 100 Hz, 10 Hz increment at 100 - 1000 Hz, for the simulation of e.g. MAP sensors
• resistance: 100 ohm - 20 kohm, for the simulation of temperature sensors
• lambda probe signal, simulating the following 3 signals:
  • 1. permanently rich
  • 2. permanently lean
  • 3. alternating rich/lean
• crankshaft position sensor signal
• camshaft position sensor signal

scope of delivery:

• 1 simulator
• 1 double measuring cable (red/black), 900 mm
• 1 measuring cable (red), 4 mm plugs (stackable), 900 mm
• 1 measuring cable (black), 4 mm plugs (stackable), 900 mm
• 3 measuring adaptor (red), 4 mm round socket to timer socket
• 3 measuring adaptor (black), 4 mm round socket to timer socket
• 3 measuring adaptor (red), 4 mm round socket to timer plug
• 3 measuring adaptor (black), 4 mm round socket to timer plug
• storage bag
• instruction manual